Carlo Scarpa - Desert

Inspired by the timeless geometry of Carlo Scarpa, our terrazzo inlay collection merges artistry and precision. Each piece is hand-crafted to highlight the natural beauty of marble and stone, creating surfaces that feel both architectural and poetic.

Our Carlo Scarpa tiles are made to order, so custom colors are absolutely possible.

12'' ×12'' ×3/4''
16"16"x3/4"

24'' ×24'' ×3/4''
32"x32" ×3/4''

For more sizes please contact our team-Info@nycementtle.com

Installation Guidelines -Please see HERE
Pre-Installation: Inspect all tiles, blend from all boxes, prepare substrate (flat, clean, cured).
Mock-up required.
Materials: Use premium medium-bed mortar (ANSI A118.4/A118.15), 1/2'' trowel,
1/16'' spacers, penetrating sealer.
Steps: Dry lay, apply mortar, back butter all tiles, set without mallet, cure 48 hrs.

Grouting & Sealing: Pre-seal tiles, grout thoroughly, clean haze, final seal after 72 hrs, optional matte wax indoors.

SEALANT RECOMMENDATIONS

Wet areas (showers, bathrooms, spas, kitchens):
We recommend the application of Laticrete® Bulletproof® Sealer to achieve a natural, breathable finish with enhanced stain and moisture protection. Both the tile surface and grout joints should be sealed as the final step of installation.

Dry areas (including floors):
We recommend sealing the grout joints with Laticrete® Bulletproof® Sealer as the final step of installation to provide additional protection against staining and long-term wear.

Please note that while terrazzo is water resistant, it is not waterproof. For this reason, we strongly recommend applying a waterproof penetrating sealer to further protect both the tile surface and grout joints, particularly in wet or high-exposure areas.

Always perform a test application in a small, inconspicuous area prior to full installation to confirm compatibility and ensure the desired appearance.

Good to know about Laticrete® Bulletproof® Sealer:

• Premium, high-performance penetrating sealer
• Designed for demanding environments, including heavy traffic and frequent cleaning
• Excellent resistance to both oil-based and water-based stains
• Commonly specified for commercial and high-use installations, including restaurants

We also recommend confirming with your installer that they are familiar with this product and that it is suitable for the specific site conditions.

Care & Maintenance
Use only pH-neutral, non-abrasive cleaners. Avoid acidic or alkaline products. Clean spills immediately and reseal as needed.

Applications & Limitations
Recommended Uses: Interior floors and walls; exterior walls and paved areas;
shower floors and walls; countertops and tabletops; residential and heavy commercial.
Limitations:
• Exterior freeze-thaw climates require waterproofing and TCNA method F102.
• Requires proper sealing to avoid staining.

1. What makes the Carlo Scarpa Terrazzo Inlay unique?

Each Carlo Scarpa tile is meticulously crafted with solid marble inlays set into a terrazzo background, creating a seamless and continuous design. The surface is refined, with minimal visible joints, offering a timeless, architectural look inspired by Scarpa’s signature geometry.

2. What materials are used to make these tiles?

Our tiles are made from a high-strength Portland cement matrix, natural marble aggregates, and mineral pigments, with inlaid solid marble pieces. Each tile is hydraulically pressed, cured, rectified, and honed to a matte finish for precision and elegance.

3. Are custom colors or designs available?

Yes. Each Carlo Scarpa tile is made to order, and custom colors or inlay variations can be developed to fit your project’s design vision.

4. What are the available sizes and order requirements?

• Minimum Order: 100 SF
  
• Lead Time: 12–14 weeks (subject to confirmation)
  
• Recommended Overage: 15–20% for cutting, blending, and future repairs
  

Standard Sizes:
12" × 12" × ¾" /16" ×16" × ¾"/24" × 24" × ¾" /32" × 32" × ¾"

5. Where can these tiles be installed?

Carlo Scarpa terrazzo inlay tiles are suitable for:

• Interior floors and walls
  
• Exterior surfaces and paved areas
  
• Shower floors and walls
  
• Countertops and tabletops
  
• Residential and heavy commercial environments
  

Note: for freeze–thaw conditions proper waterproofing is required.

6. How durable are these tiles?

They are designed for both Residential and heavy Commercial applications.
Key performance standards include:

• DCOF: Avg. 0.56 (ANSI A326.3) Can be adjusted to R11 as well.
  
• Water Absorption: Avg. 1.72% (Vitreous)
  
• Compressive Strength: >8000 psi
  
• Flexural Strength: >900 psi
  
• Abrasion Resistance: Class IV
  
• Freeze-Thaw Resistance: Passes
  
• Chemical Resistance: Resistant to most cleaning agents (avoid acids)
  

7. How do I maintain Carlo Scarpa terrazzo tiles?

• Clean with pH-neutral, non-abrasive cleaners only.
  
• Avoid acidic or alkaline products.
  
• Wipe spills immediately to prevent staining.
  
• Reseal periodically depending on use and exposure.
  

8. Are these tiles suitable for outdoor or pool use?

Yes. Our tiles are suitable for outdoor and wet-area applications, including pools. The Carlo Scarpa Terrazzo collection can be produced with an R11 anti-slip rating, making it ideal for pool surrounds, showers, and other high-moisture environments when properly specified and installed.