Inspired by the timeless geometry of Carlo Scarpa, our terrazzo inlay collection merges artistry and precision. Each piece is hand-crafted to highlight the natural beauty of marble and stone, creating surfaces that feel both architectural and poetic.

Our Carlo Scarpa tiles are made to order, so custom colors are absolutely possible.

Available Sizes:
12'' ×12'' ×3/4''
24'' ×24'' ×3/4''
24'' ×48'' ×3/4''
48'' ×48'' ×1''
48'' ×96'' ×1''

Applications & Limitations
Recommended Uses: Interior floors and walls; exterior vertical walls and paved areas;
shower floors and walls; countertops and tabletops; residential and heavy commercial.
Limitations:
• Not recommended for high acid exposure environments.
• Exterior freeze-thaw climates require waterproofing and TCNA method F102.
• Requires proper sealing to avoid staining.
Installation Guidelines
Pre-Installation: Inspect all tiles, blend from all boxes, prepare substrate (flat, clean, cured).
Mock-up required.
Materials: Use premium medium-bed mortar (ANSI A118.4/A118.15), 1/2'' trowel,
1/16'' spacers, penetrating sealer.
Steps: Dry lay, apply mortar, back butter all tiles, set without mallet, cure 48 hrs.

Grouting & Sealing: Pre-seal tiles, grout thoroughly, clean haze, final seal after 72 hrs,
optional matte wax indoors.

Care & Maintenance
Use only pH-neutral, non-abrasive cleaners. Avoid acidic or alkaline products such as vinegar,
bleach, or ammonia. Clean spills immediately and reseal as needed.

For more Technical info see here

1. What makes the Carlo Scarpa Terrazzo Inlay unique?

Each Carlo Scarpa tile is meticulously crafted with solid marble inlays set into a terrazzo background, creating a seamless and continuous design. The surface is refined, with minimal visible joints, offering a timeless, architectural look inspired by Scarpa’s signature geometry.

2. What materials are used to make these tiles?

Our tiles are made from a high-strength Portland cement matrix, natural marble aggregates, and mineral pigments, with inlaid solid marble pieces. Each tile is hydraulically pressed, cured, rectified, and honed to a matte finish for precision and elegance.

3. Are custom colors or designs available?

Yes. Each Carlo Scarpa tile is made to order, and custom colors or inlay variations can be developed to fit your project’s design vision.

4. What are the available sizes and order requirements?

• Minimum Order: 100 SF
  
• Lead Time: 12–14 weeks (subject to confirmation)
  
• Recommended Overage: 15–20% for cutting, blending, and future repairs
  

Standard Sizes:

12" × 12" × ¾"

24" × 24" × ¾"

24" × 48" × ¾"

48" × 48" × 1"

48" × 96" × 1"

5. Where can these tiles be installed?

Carlo Scarpa terrazzo inlay tiles are suitable for:

• Interior floors and walls
  
• Exterior vertical surfaces and paved areas
  
• Shower floors and walls
  
• Countertops and tabletops
  
• Residential and heavy commercial environments
  

Note: Not recommended for areas with high acid exposure or freeze–thaw conditions without proper waterproofing.

6. How durable are these tiles?

They are designed for both residential and heavy commercial applications.

Key performance standards include:

• DCOF: Avg. 0.56 (ANSI A326.3)
  
• Water Absorption: Avg. 1.72% (Vitreous)
  
• Compressive Strength: >8000 psi
  
• Flexural Strength: >900 psi
  
• Abrasion Resistance: Class IV
  
• Freeze-Thaw Resistance: Passes
  
• Chemical Resistance: Resistant to most cleaning agents (avoid acids)
  

7. How do I maintain Carlo Scarpa terrazzo tiles?

• Clean with pH-neutral, non-abrasive cleaners only.
  
• Avoid acidic or alkaline products (e.g., vinegar, bleach, ammonia).
  
• Wipe spills immediately to prevent staining.
  
• Reseal periodically depending on use and exposure.
  
• For interior use, a matte wax finish may be applied for additional protection.
  

8. Are these tiles suitable for outdoor or pool use?

They can be used on exterior vertical surfaces and certain outdoor floors when properly waterproofed. However, they are not recommended for submerged or high-acid environments such as pools without special treatment or engineering review.